Smart Watch ESP32 Open Source E-Watch WiFi bluetooth Programmable Watch E-Paper with Open Source Hardware and Software
184
Direct purchase from the factory 
ደህንነቱ የተጠበቀ ክፍያ
ነፃ ስጦታ
የመላኪያ ፖሊሲ
የመመለሻ ፖሊሲነፃ ስጦታ
እንኳን ወደ Roymall በደህና መጡ፣ ለከፍተኛ ደረጃ የስጦታ መደብር ስጦታዎች የሚገዙበት ሙያዊ ድረ-ገፃችን። ድጋፍዎን ከፍ ብለን እናደርገዋለን እናም በእያንዳንዱ ግዢዎ ላይ ተጨማሪ ደስታ በማክበር አመስጋኝነታችንን ለመግለጽ እንፈልጋለን። ከእኛ ጋር በሚገዙበት ጊዜ፣ የሕይወት ደረጃዎን የሚያሻሽሉ ከፍተኛ ጥራት ያላቸውን ምርቶች ብቻ ሳይሆን እያንዳንዱን ትዕዛዝ የሚያገኙበትን ልዩ ነፃ ስጦታም ያገኛሉ። ስብስባችንን ለመጎብኘት እና ፍጹም ስጦታዎችዎን ለማግኘት ዝግጁ ነዎት? የከፍተኛ ደረጃ የስጦታ መደብር እቃዎችን ይምረጡ፣ ትዕዛዝዎን ያቅርቡ እና ከግዢዎ ጋር የሚመጣውን የነፃ ስጦታዎ ደስታ ይጠብቁ።የመላኪያ ፖሊሲ
ትዕዛዞችዎን ከተቀበልን በኋላ እቃዎችን ወደእርስዎ ለማድረስ እና በሰላም እንዲደርሱ እንሰራለን። የመላኪያ ዝርዝሮች በማረጋገጫ ኢሜልዎ ውስጥ ይሰጣሉ።በአብዛኛዎቹ ሁኔታዎች፣ ትዕዛዞች በ2 ቀናት ውስጥ ይቀርባሉ።በልዩ ሁኔታዎች፣ እንደሚከተለው ይዘገያል፡ ትዕዛዝን ቅዳሜ፣ እሑድ ወይም በዓላት ላይ ሲያቀርቡ፣ ለ2 ቀናት ይዘገያል..በአብዛኛው፣ ያለ የበረራ መዘግየት ወይም ሌሎች የአካባቢ ሁኔታዎች ተጽዕኖ ሳይኖርበት 5-7 የስራ ቀናት (ሰኞ እስከ ዓርብ) ይፈልጋል..የመላኪያ አገልግሎታችን በዓለም ዙሪያ ስለሆነ፣ የመላኪያ ጊዜዎች በአካባቢዎ ላይ የተመሰረቱ ስለሆኑ በርቀት ያሉ አካባቢዎች ወይም ሀገሮች ውስጥ ከሆኑ ጥቂት ጊዜ ይፈልጋል እና በትዕግስት ይጠብቁ።1. መመለሻ እና መለዋወጫ ፖሊሲ
እቃዎችን ከ roymall.com ብቻ እንቀበላለን። ከአካባቢያችን አከፋፋዮች ወይም ሌሎች ነጋዴዎች ከገዙ፣ ከእኛ ጎን መመለስ አይችሉም። የመጨረሻ ሽያጭ ዕቃዎች ወይም ነፃ ስጦታዎች ለመመለስ አይቀበሉም። ለመመለስ ብቁ ለመሆን፣ ዕቃዎ ያልተጠቀሙበት እና እንደተቀበሉት በተመሳሳይ ሁኔታ ውስጥ መሆን አለበት። እንዲሁም በዋናው ማሸጊያ ውስጥ መሆን አለበት።ከእኛ የመመለሻ መመሪያዎችን ከተቀበሉ በኋላ፣ የተመለሱ ዕቃዎችዎን ያሸጉ እና ጥቅልዎን በአካባቢያችሁ ፖስታ ቤት ወይም ሌላ ኩሪየር ላይ ያስቀምጡ።የተመለሰውን ወይም የተለወጠውን ዕቃ በ3-5 የስራ ቀናት ውስጥ ከተቀበልን በኋላ እንሰራለን። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል።ምርቱ ልዩ ከተሰራ፣ ልዩ መጠን፣ ልዩ ቀለም ወይም ልዩ ህትመት ጨምሮ፣ �ንዳንድ መመለስ ወይም መለወጥ አይችልም።ተጨማሪ እርዳታ ከፈለጉ፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +8619359849471
2.የመመለሻ ፖሊሲ
የተመለሰውን ጥቅል ከተቀበልን እና ከተፈተነ በኋላ ሙሉ መመለሻ ወይም 100% የማከማቻ ክሬዲት ያገኛሉ። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል። እባክዎን ያስታውሱ የመላኪያ ወጪዎች እና ማንኛውም ታክስ ወይም ክፍያዎች መመለስ አይቻልም። ተጨማሪ የመላኪያ ወጪዎች ጥቅሉ ከተላከ በኋላ መመለስ አይቻልም። እነዚህን ክፍያዎች ለመክፈል እርስዎ ተጠያቂ ነዎት እና ትዕዛዙ ወደእኛ ከተመለሰም ሊሰረዙ ወይም መመለስ አይችሉም።ከተመለሰው ዕቃ ከተቀበልን እና ከተረጋገጠ በኋላ፣ የተመለሰውን ዕቃ እንደተቀበልን ለማሳወቅ ኢሜይል እንልካለን። እንዲሁም የመመለሻዎ መፈቀድ ወይም ማያያዣ ስለሆነ እናሳውቅዎታለን።በመመለሻ ሂደቱ ላይ ችግር ካጋጠመዎት፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +8619359849471
Specifications:
1. Ultra-low power e-paper 1.54-inch display with a resolution of 200 x 200 and a wide viewing angle2. Wi-Fi and Bluetooth LE connection3. 3-axis accelerometer with gesture detection4. Real-time clock with calendar and alarm functions for accurate timing5. Built-in USB to serial adapter allows programming anytime and anywhere6. Vibration motor for alarm7. Four buttons (use imported buttons, which feel better)8. Open source hardware and software9. Tons of examples and cool watch faces10. Open source 3D case design11. Built-in 3.7V 200mAh battery12. The use of PCB upper and lower covers can better protect the screen, battery and various components on the motherboard.Battery Life:Watch wakes up every 60 seconds, checks the accelerometer, real-time clock, and updates the e-paper display with the latest information. Some watch faces also turn on WiFi to get weather data.The Watch should have 5-7 days of battery life when just timing time, and 2-3 days when getting data over WiFi. These numbers can be expanded with further optimizations (e.g. sleep during off-hours, wake only on movement/tilt, etc.)User Manual: Please scan the QR code on the product packagingSpecial note: Please be sure to select the hardware version V2.0 when flashing
Features:
1. With ESP-32, Watch supports various development options (for Arduino, Micropython, ESP-IDF, Zephyr-RTOS, etc.) and has a large community for makers/hackers/tinkers.
2. Uses Wi-Fi and bluetooth LE connectivity to connect to internet APIs (Weather, News, Traffic, Maps, Spotify, etc.) and bluetooth LE devices.
3. Comes with open source hardware and software, a variety of examples and cool watch faces, and 3D case designs.
4. Its display conserves power, only using power when updating, and remains clear and visible even in direct sunlight.
5. Has IO ports for users to connect various sensors like heart rate and oxygen monitors.
1. Ultra-low power e-paper 1.54-inch display with a resolution of 200 x 200 and a wide viewing angle2. Wi-Fi and Bluetooth LE connection3. 3-axis accelerometer with gesture detection4. Real-time clock with calendar and alarm functions for accurate timing5. Built-in USB to serial adapter allows programming anytime and anywhere6. Vibration motor for alarm7. Four buttons (use imported buttons, which feel better)8. Open source hardware and software9. Tons of examples and cool watch faces10. Open source 3D case design11. Built-in 3.7V 200mAh battery12. The use of PCB upper and lower covers can better protect the screen, battery and various components on the motherboard.Battery Life:Watch wakes up every 60 seconds, checks the accelerometer, real-time clock, and updates the e-paper display with the latest information. Some watch faces also turn on WiFi to get weather data.The Watch should have 5-7 days of battery life when just timing time, and 2-3 days when getting data over WiFi. These numbers can be expanded with further optimizations (e.g. sleep during off-hours, wake only on movement/tilt, etc.)User Manual: Please scan the QR code on the product packagingSpecial note: Please be sure to select the hardware version V2.0 when flashing
Features:
1. With ESP-32, Watch supports various development options (for Arduino, Micropython, ESP-IDF, Zephyr-RTOS, etc.) and has a large community for makers/hackers/tinkers.
2. Uses Wi-Fi and bluetooth LE connectivity to connect to internet APIs (Weather, News, Traffic, Maps, Spotify, etc.) and bluetooth LE devices.
3. Comes with open source hardware and software, a variety of examples and cool watch faces, and 3D case designs.
4. Its display conserves power, only using power when updating, and remains clear and visible even in direct sunlight.
5. Has IO ports for users to connect various sensors like heart rate and oxygen monitors.
Wireless network:1. Click Set Wifi in the watch main menu.2. Connect to the "WatchyAp" wifi from another device, such as a mobile phone or computer/laptop.3. Open 192.168.4.1 in your browser. On a Phone, this page opens on its own when connected to wifi.4. Click on "Configure WiFi"5. Enter the SSID and password. (Note: SSID can be pre-filled through the network listed at the top of this screen)6. Click the "Save" button and wait for Watch.7. If the connection fails, the watch will display "Setup failed and timed out!" Otherwise, the local IP address and SSID of the connected network are displayed and confirmed.
Package includes:
1x ESP32 Open Source E-Watch
1x Watch Band
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
